For objectives there is option to use
POINT TYPE 35 for area, but use it only when objective has more than one point ie:
Code:
[872] = {
Quest = [[The Far Watch Offensive|2|12|9|0|0]],
Start = "101|11|32|48.60|59.60",
End = "101|11|32|48.60|59.60",
Objectives = {
[1] = {
"nil|11|35|64.32|51.84|19.24|9.62", <= "19.24|9.62" height|width of area box, base is 9.62 multiplied if bigger is needed
"nil|11|35|63.36|53.28|38.48|9.62",
"nil|11|35|62.40|54.72|48.10|9.62",
"nil|11|35|62.40|56.16|38.48|9.62",
"nil|11|35|63.36|57.60|9.62|9.62",
},
[2] = {
"nil|11|35|65.28|50.40|19.24|9.62",
"nil|11|35|63.36|51.84|48.10|19.24",
"nil|11|35|62.40|54.72|48.10|9.62",
"nil|11|35|63.36|56.16|38.48|9.62",
"nil|11|35|64.32|57.60|9.62|9.62",
},
[3] = {
"nil|11|32|63.72|54.08|9.62|9.62", <= BUT HERE IS 32 becouse its only one point
},
},
}