Go to Page... |
Compatibility: | Cataclysm Classic (4.4.0) |
Updated: | 07-13-24 03:44 AM |
Created: | unknown |
Downloads: | 19,668 |
Favorites: | 68 |
MD5: | |
Categories: | Raid Mods, Cataclysm Classic, Group, Guild & Friends, WoW Tools & Utilities |
Group O Matic makes it easier for the raid leader to set up the group arrangement. It can save and restore what groups people are in.
It also has an Auto button, which can push everyone to the top, or group melee together, or split the group into the odd/even group numbers, or other things. What the Auto button does is set by the "auto-arrange template" menu.
You can exclude the groups at the end of the raid from being changed, so that you can use those groups for bench/standby players (click More > Settings > Exclude groups).
The addon will show up when you open the raid UI.
=======================================
This addon also has some manual /commands:
/rgs 1 2 will swap the entire group 1 with the entire group 2.
/rgm 1 2 will push everyone from group 1 into group 2, if possible.
=======================================
Things the Auto button can be set to do (click More and pick from the auto-arrange template menu):
1. Group melee/tanks, healers, and range with similar players.
2. Push everyone to the top of the group list.
3. Split the group into two halves, attempting to balance tanks, healers and melee DPS.
4. Group players by what map location they are at.
File Name |
Version |
Size |
Author |
Date |
4.0.0 |
58kB |
Akryn |
07-31-17 10:41 AM |
Comment Options |
llcorell |
View Public Profile |
Send a private message to llcorell |
Find More Posts by llcorell |
Add llcorell to Your Buddy List |
07-12-24, 06:12 PM | ||
|
Last edited by llcorell : 07-12-24 at 06:48 PM.
|
|
|
llcorell |
View Public Profile |
Send a private message to llcorell |
Find More Posts by llcorell |
Add llcorell to Your Buddy List |
09-04-20, 06:03 PM | ||
|
Unfortunately I don't have a WoW sub anymore, and don't really want to pay $15 to get access to Classic for a month so I can fix it, haha.
However, you might actually want an older version. I wrote the 1.x versions way back in WoW Vanilla or BC for 40-mans. I see they aren't hosted here anymore, but maybe somewhere on the Internet they still exist. If not, if you do decide to try to fix it yourself I'd be happy to offer assistance. The Forums here would probably be helpful too.
|
|
|
Akryn |
View Public Profile |
Send a private message to Akryn |
Find More Posts by Akryn |
Add Akryn to Your Buddy List |
09-04-20, 02:31 PM | |
A Kobold Labourer
Forum posts: 0
File comments: 1
Uploads: 0
|
What are the chances you can get this working for WoW Classic? It looks to load but the auto-sort does not. I get an infinite loop error.
I'm tempted to learn lua just to get this addon working again as group management is a pain with 40 people. |
|
MarshallX |
View Public Profile |
Send a private message to MarshallX |
Find More Posts by MarshallX |
Add MarshallX to Your Buddy List |
07-31-17, 10:39 AM | |||
|
Re: Re: UPDATE
pushed the update now |
||
|
llcorell |
View Public Profile |
Send a private message to llcorell |
Find More Posts by llcorell |
Add llcorell to Your Buddy List |
07-30-17, 11:44 AM | ||
|
Re: UPDATE
Sure, glad to see people still finding this useful.
|
|
|
Akryn |
View Public Profile |
Send a private message to Akryn |
Find More Posts by Akryn |
Add Akryn to Your Buddy List |
07-30-17, 01:31 AM | |
|
UPDATE
Ive managed to add demon hunters into the melee group , and stop it calling a protected fuction.
can i have permission to update this here? |
|
llcorell |
View Public Profile |
Send a private message to llcorell |
Find More Posts by llcorell |
Add llcorell to Your Buddy List |
10-27-10, 09:45 PM | |
|
Thanks for the update! (gonna test it)
|
|
Fionn |
View Public Profile |
Send a private message to Fionn |
Find More Posts by Fionn |
Add Fionn to Your Buddy List |
10-16-10, 06:21 PM | |
|
2.7.0 is untested
I don't have an active account ATM, so I can't test it. It may not even load, so use at your own risk.
|
|
Akryn |
View Public Profile |
Send a private message to Akryn |
Find More Posts by Akryn |
Add Akryn to Your Buddy List |
07-03-10, 01:14 PM | |
|
FYI, GOM should not need to be changed to deal with the inspect rate capping in 3.3.5; but there's a much higher chance of addon conflicts. If you are getting bad performance with the talent scanner, turning on /gom debug might give you some information as to why. If you have too many addons trying to scan at once and it's triggering the cap, GOM's debug output will probably report that as "latency too high" but it might also report it as an addon conflict, depending on the situation.
I don't think GOM itself is likely to be a problem for other addons; but please let me know if you see it behaving poorly. If it does, you can always turn off "Continuous Scan." Also, just as an extra piece of information for anyone who feels inclined to muck around, running this command: Code:
/run GrOM_G_Vars.loadScript = "GrOM.talentRequestTTL = 1.8" Code:
/run GrOM_G_Vars.loadScript = nil
Last edited by Akryn : 07-03-10 at 01:24 PM.
|
|
Akryn |
View Public Profile |
Send a private message to Akryn |
Find More Posts by Akryn |
Add Akryn to Your Buddy List |
04-23-10, 08:02 PM | ||
|
Ah...that's a new one then. I don't usually use that so I'll have to experiment with it. I'm still not sure whether I can stop the tainting; but now that I know how to repeat it I'll see if I can figure it out.
Thanks again.
|
|
|
Akryn |
View Public Profile |
Send a private message to Akryn |
Find More Posts by Akryn |
Add Akryn to Your Buddy List |
04-23-10, 07:23 PM | |
|
Hi there
Its easy to replicate the problem. Log in sit down open the raid browser, and wait. it will happen soonTM-er or later. I'm using PitBull unit frame since years so i gave up on setting the focus over the drop down menu long ago I dont have problems at all with that error its causing no trouble, I just wanted to let you know, maybe it helps you a bit. Maybe it does not /Keep up the good work! /Cheers |
|
Fionn |
View Public Profile |
Send a private message to Fionn |
Find More Posts by Fionn |
Add Fionn to Your Buddy List |
04-18-10, 09:42 AM | ||
|
Hi,
I believe that this is an example of a bug in Bliz's dropdown menu code that has been there for some time. Almost always it manifests when trying to set/clear focus via the right-click context menu on a unitframe (although in this case I see it was the LFG tool, which I've seen happen before also). If you disable GOM you will probably still have the same problem caused by another addon because it just reports whichever one caused it last. The usual way around the focus problem, if that happens, is to just use a keybind or the /focus command to set/clear your focus, rather than the right-click menu. If you're only getting the error from GOM and it's causing you a problem, a workaround may be to rename/delete groupomatic.xml (so that the GUI doesn't load) and then just use the slash commands -- although that seems like too much trouble to me, unless you don't use the GUI anyway. I've never seen it actually cause a problem either, it just reports the taint error and then continues on like nothing happened. If you got this in some other circumstance, or if you can repeat it, or if it's actually breaking something, please let me know what steps to use to replicate the problem so that I can debug it. Thanks for the report.
Last edited by Akryn : 04-18-10 at 09:47 AM.
|
|
|
Akryn |
View Public Profile |
Send a private message to Akryn |
Find More Posts by Akryn |
Add Akryn to Your Buddy List |
04-17-10, 06:52 PM | |
|
Hi,
Im not getting that one But i have one that says: Interface action failed.... And the log is: 4/18 02:47:44.380 Global variable COMBAT_TEXT_X_SCALE tainted by groupomatic - Interface\AddOns\Blizzard_CombatText\Blizzard_CombatText.lua:552 CombatText_UpdateDisplayedMessages() 4/18 02:47:44.380 Interface\FrameXML\InterfaceOptionsPanels.lua:1051 4/18 02:47:44.380 Execution tainted by groupomatic while reading COMBAT_TEXT_X_SCALE - Interface\AddOns\Blizzard_CombatText\Blizzard_CombatText.lua:376 4/18 02:47:44.380 An action was blocked because of taint from groupomatic - SearchLFGLeave() 4/18 02:47:44.380 Interface\FrameXML\LFRFrame.lua:389 LFRBrowseFrame_OnUpdateAlways() 4/18 02:47:44.380 UIParent:OnUpdate() I had the raid browser open at that time. |
|
Fionn |
View Public Profile |
Send a private message to Fionn |
Find More Posts by Fionn |
Add Fionn to Your Buddy List |
03-31-10, 04:46 PM | |
|
To anyone getting that error: what does this print?
Code:
/run print(select(2, UnitClass("player")))
Last edited by Akryn : 03-31-10 at 04:47 PM.
|
|
Akryn |
View Public Profile |
Send a private message to Akryn |
Find More Posts by Akryn |
Add Akryn to Your Buddy List |