Go to Page... |
Updated: | 12-06-10 04:15 PM |
Created: | unknown |
Downloads: | 24,291 |
Favorites: | 123 |
MD5: |
This highly configurable mod allows players to associate buttons to unit frames. It is meant as a replacement to GroupButtons which stopped functioning with the 2.0 patch in December 2006. The mod extends the capabilities of GroupButtons by providing these additional features:
New: Support for default profiles for spec1 and spec 2 New: Wizards for Group and Profile generation Please use them ! New: LDB button (and menu) New: Default Buttons now always use the Prefix 'SB_' This is an abbreviation for StandardButton. I recommend to use 'CB_' as prefix for custom buttons. New: '$' self condition for cast buttons (buff, debuff etc.) Example: CB_Renew,buff,Renew,$Renew This custom buutton will only chnge to the state BUFFED if the destination unit is buffed with your OWN Renew. New: '!' inverts conditions for cast buttons (buff, debuff etc.) New: new debuff condition "Death" A button with this condition is only shown if the destination unit is dead. New: new debuff condition "Purge" A button with this condition is only shown if the destination unit has at least one buff to purge. New: two keywords for exclude-units: 'hostile' and 'friendly' Example: MyGroupName,SB_Renew,*,hostile This button will be hidden on hostile units (= it will only be shown on friendly units) New: Spell ranks have been removed (multiranking too) New: Macro buttons support now '[target=unit#]' Here unit# will be rpalced at runtime with the unit the button is attached to. Example: /target [target=unit#] Improved: Verification of buttons while configuring the addon And last but not least: !!! Improved: Internals are mostly rewritten from scratch for better performance !!! Please refer to 'z_historic_Changelog.txt' for older changes.
File Name |
Version |
Size |
Author |
Date |
Type |
2.1beta4 |
104kB |
09-15-12 11:51 AM |
Addon |
||
upload1 RC2 |
105kB |
12-01-10 11:42 AM |
Addon |
![]() |
Comment Options |
fredddredd |
View Public Profile |
Send a private message to fredddredd |
Find More Posts by fredddredd |
Add fredddredd to Your Buddy List |
![]() |
||
|
Re: Re: Re: XUB + Pitbull4 group frames
Yeah, I'm there with ya. I depend on XUB for my gaming experience too.
<crosses fingers>
|
|
![]() |
![]() |
Cosmic Cleric |
View Public Profile |
Send a private message to Cosmic Cleric |
Find More Posts by Cosmic Cleric |
Add Cosmic Cleric to Your Buddy List |
![]() |
||
A Kobold Labourer
Forum posts: 0
File comments: 16
Uploads: 0
|
Re: Re: Re: Re: XUB + Pitbull4 group frames
|
|
![]() |
![]() |
Grumwha |
View Public Profile |
Send a private message to Grumwha |
Find More Posts by Grumwha |
Add Grumwha to Your Buddy List |
![]() |
|
|
v1.9 beta 19 has been posted
![]() Enjoy ! Sorry that it took so long, real life is terribly busy at the moment. Have fun ! tay |
![]() |
![]() |
tayedaen |
View Public Profile |
Send a private message to tayedaen |
Find More Posts by tayedaen |
Add tayedaen to Your Buddy List |
![]() |
||
|
Tay, TY for the new version!
I found one bug, and reported it in the comments section for ß19 (http://www.wowinterface.com/download...17328#comments).
|
|
![]() |
![]() |
Cosmic Cleric |
View Public Profile |
Send a private message to Cosmic Cleric |
Find More Posts by Cosmic Cleric |
Add Cosmic Cleric to Your Buddy List |
![]() |
|
|
Tay ROCKS!
Thank you for the update. |
![]() |
![]() |
abinning |
View Public Profile |
Send a private message to abinning |
Find More Posts by abinning |
Add abinning to Your Buddy List |
![]() |
|
|
Hello,
I am no mod/addon expert, so while installing this, I understood the instructions just fine (at least the quick start I could make, and the buttons appeared and worked), but: - What I did, did not get saved when I logged over another character. - My "Options" screen doesn't have the X/Y options, and some other differences from the screenshot in the instructions. What I have installed is the first file and the last beta update. I installed the first, then copied and glued the contents of the beta. Did I do something wrong there? Edit: and if it helps, I am using it with XPerl
Last edited by Carolina : 09-07-10 at 06:12 AM.
|
![]() |
![]() |
Carolina |
View Public Profile |
Send a private message to Carolina |
Find More Posts by Carolina |
Add Carolina to Your Buddy List |
![]() |
||
|
Carolina,
To your first point, what you described is done on purpose. Each character gets their own 'profile' of options and button configurations. What I did, when I used to play WoW, was use the Windows copy and paste function (Ctrl-C and Ctrl-V, respectively), and saved my button configurations to Notepad files, one for each character. Then I'd copy and paste over the relevant button configurations. Had to set the Options manually, but that was quick enough to do. Be aware though, that if you have a level 80 Pally (for example) and you create a new level 1 Pally, you can't just copy/paste the 80's button configuration over to the 1's Pally, as most of the spells, abilities are not known yet to the 1 Pally and XUB will generate errors. You'll have to add them to the 1 Pally as they level. To your second point, I'll let the devs chime in here, but I think you can get away with just downloading the latest beta and installing that. Downloading/installing the first version then overwriting it with the latest beta version would work too, but I'd just try the latest beta version first. Good luck!
Last edited by Cosmic Cleric : 09-07-10 at 01:00 PM.
|
|
![]() |
![]() |
Cosmic Cleric |
View Public Profile |
Send a private message to Cosmic Cleric |
Find More Posts by Cosmic Cleric |
Add Cosmic Cleric to Your Buddy List |
![]() |
||
|
Hmm I expressed myself wrong.
I did the /xub p <profilename>, but once I logged out, all I did got erased. Is there a command to do once all is done so it is saved? (other then the button after "verify"). Thank you for the tip on the high lvl/low lvl character copy/paste! And another thing for the person who runs the website for the mod: Here: http://xub.abits.biz/forum/index.php?mode=thread&id=5 There is an error there. It says "BR" for separated lines, but its "CR" (or at least it is what worked for me, after reading the shaman example posted). I play as a "disco" priest, any tips or good examples are welcome! Or some UI screenshots ![]()
|
|
![]() |
![]() |
Carolina |
View Public Profile |
Send a private message to Carolina |
Find More Posts by Carolina |
Add Carolina to Your Buddy List |
![]() |
|
|
@Carolina:
Cosmic Cleric's explanation are correct (as always ![]() The X/Y option is gone, and will not return. Screenshots are not up to date (yet). Instead of adjusting all buttons globally with the X/Y option, it's better to arrange them while adding a group to a frame. It's much more versatile this way. It's done like this: Code:
GROUP specifications: Heal1,Renew,* PROFILE specifications: normal,player,Heal1,10,50 Concerning the saving of your settings: The settings for ALL addons are saved at logout. If you were not leaving the game with a normal logout, then no save will be done. To circumvent this, I always type '/console reloadui' after changing my settings. This forces the saving of all addon settings ![]() I play a disc priest myself, so I will post some examples when I am at home again. @ALL: I am in the Cataclysm beta, and got the basics working. The above example is working already. So instead of updating screenshots I am just updating the addon for cataclyms - which might prove more usefull in the end ![]() Have fun tay
Last edited by tayedaen : 09-08-10 at 07:20 AM.
|
![]() |
![]() |
tayedaen |
View Public Profile |
Send a private message to tayedaen |
Find More Posts by tayedaen |
Add tayedaen to Your Buddy List |
![]() |
|
|
Hmm so I did something "special" and messed up. It simply won't save the changes on this addon, I log off properly, I tried the /console reloadui. I did place it into Interface>AddOns, it works, I make buttons, they cast spells, etc, just won't save changes.
Changes to other UI elements are being saved though. Any ideas what I did wrong? |
![]() |
![]() |
Carolina |
View Public Profile |
Send a private message to Carolina |
Find More Posts by Carolina |
Add Carolina to Your Buddy List |
![]() |
||
|
Here's how I had my setup... Code:
CUSTOM BUTTONS _TrinketPvP1,use,Medallion of the Alliance _TrinketPvP2,use,Platinum Disks of Sorcery _TrinketPvE1,use,Ephemeral Snowflake _TrinketPvE2,use, _Bandage,use,Heavy Frostweave Bandage,Recently Bandaged _HealPot,use,Greater Healing Potion, _Heal3,healthblink,Binding Heal,,1631 _Heal2,health,Greater Heal,,3434 _FlashHeal,health,Flash Heal,,1602 _Stoneform,debuffblink,Stoneform,,Bleed/Disease/Poison _PWFortBlink,buffblink,Power Word: Fortitude,,Fortitude/Power Word: Fortitude/Prayer of Fortitude/K'iru's Song of Victory/Swift Purple Gryphon _PWFort,buff,Power Word: Fortitude,,Power Word: Fortitude/Prayer of Fortitude/K'iru's Song of Victory _DivineSpirit,buff,Divine Spirit,,Divine Spirit/Prayer of Spirit _DivineSpiritBlink,buffblink,Divine Spirit,,Divine Spirit/Prayer of Spirit/Swift Purple Gryphon _ShadowProtect,buff,Shadow Protection,,Shadow Protection/Prayer of Shadow Protection _PWShield,buff,Power Word: Shield,,Power Word: Shield/Weakened Soul _InnerFire,buffblink,Inner Fire,,Inner Fire/Swift Purple Gryphon _AbolishDisease,debuffblink,Abolish Disease,,!Abolish Disease/Disease _DispelMagic,debuffblink,Dispel Magic,,Magic _AntiVenom,use,Powerful Anti-Venom,!Poison _FireSeed,use,Fire Seed _InnerFire,buffblink,Inner Fire,,Inner Fire _FreeActionPot,use,Free Action Potion, _Renew,buff,Renew,,Renew GROUP healAll,_Heal2,* healAll,_FlashHeal,* healAll,_Renew,* healAll,Penance,* healAll,PrayerofMending,* healAll,_Bandage,* healPR,_Heal2,* healPR,_Heal3,* healPR,_FlashHeal,* healPR,_Renew,* healPR,PrayerofMending,* healPR,Penance,* healPR,BindingHeal,* healPR,_Bandage,* healMe,PrayerofHealing,* healMe,DivineHymn,* healTarget,GreaterHeal,* healTarget,Heal,* healTarget,BindingHeal,* healTarget,FlashHeal,* healTarget,_Renew,* healTarget,Penance,* healTarget,PrayerofMending,* healTarget,_Bandage,* healRaid,GreaterHeal,* healRaid,FlashHeal,* healRaid,_Renew,* healRaid,Penance,* healRaid,PrayerofMending,* buffMe,_PWFortBlink,* buffMe,_DivineSpiritBlink,* buffMe,_InnerFire,* buffMe,_ShadowProtect,* buffMe,FearWard,* forAll,_PWShield,* forAll,PainSuppression,* forAll,PowerInfusion,*,Rogue/Warrior forAll,_AbolishDisease,* forAll,_DispelMagic,* TrinketsPvP,_TrinketPvP1,* TrinketsPvP,_TrinketPvP2,* TrinketsPvE,_TrinketPvE1,* forMe,_FreeActionPot,* forMe,_Stoneform,* forMe2,Fade,* forMe2,Levitate,* forTarget,FearWard,* buffParty,_PWFortBlink,* buffParty,_DivineSpiritBlink,* buffParty,_ShadowProtect,* buffParty,FearWard,* buffRaid,_PWFort,* buffRaid,_DivineSpirit,* buffRaid,ShadowProtect,* attack,DevouringPlague,* attack,Shadowfiend,* attack,MindControl,* attack,ShackleUndead,* attack,MindVision,* attack,MindSoothe,* PROFILE pvp,player,healAll,0,32 pvp,player,healMe pvp,player,CR pvp,player,buffMe pvp,player,forMe2 pvp,player,CR pvp,player,forAll pvp,player,forMe pvp,player,TrinketsPvP pvp,target,healTarget,65,65 pvp,target,forAll pvp,target,buffParty pvp,target,CR pvp,target,attack,65,0 pvp,party,healAll,0,47 pvp,party,buffParty pvp,party,forAll pvp,partypet,healAll,20,0 pvp,partypet,forAll pvp,raid,healRaid,270,-50 pvp,raid,forAll pve,player,healAll,0,32 pve,player,healMe pve,player,CR pve,player,buffMe pve,player,forMe2 pve,player,CR pve,player,forAll pve,player,forMe pve,player,TrinketsPvE pve,target,healTarget,0,45 pve,target,forAll pve,target,buffParty pve,target,CR pve,target,attack pve,party,healAll,0,47 pve,party,buffParty pve,party,forAll pve,partypet,healAll,20,0 pve,partypet,forAll pve,raid,healRaid,270,-50 pve,raid,forAll Unfortunately, I no longer have any screenpics to share, as I deleted the ones I had. Hope you find this useful.
Last edited by Cosmic Cleric : 09-08-10 at 03:54 PM.
|
|
![]() |
![]() |
Cosmic Cleric |
View Public Profile |
Send a private message to Cosmic Cleric |
Find More Posts by Cosmic Cleric |
Add Cosmic Cleric to Your Buddy List |
![]() |
|
|
Thank you for sharing, Cosmic Cleric!
I just tested to turn off all addons but Extreme, and it still doesn't save the changes. Any ideas what could be the problem? |
![]() |
![]() |
Carolina |
View Public Profile |
Send a private message to Carolina |
Find More Posts by Carolina |
Add Carolina to Your Buddy List |
![]() |
||
|
As far as your other problem, first make sure the buttons are large enough for you to see. Go to the configuration screens, make the buttons large (ex.: 40) and make sure you tell XUB what window UI you are using. Second, make sure you're working with the right XUB profile. You use the command (from the chat window) '/xub profile <PROFILE NAME>', where <PROFILE NAME> is a name for your profile. For me, I had two profiles, a pvp, and a pve profile, and I switched back and forth between them by doing either... Code:
/xub profile pvp Code:
/xub profile pve Code:
/xub profile default For example... Code:
healAll,PrayerofMending,* pvp,player,healAll,0,32 pve,player,healAll,0,32 Also, remember that you have to either 1) Logout or 2) Do a '/console reloadui' command from the chat window, to have your settings saved. If you are just killing WoW instead of logging out/exiting, your changes will not be saved. If your problem is not a profile naming problem, then try this... Check to see if you have a settings file for your character. If you installed WoW in the default location, it should be located here... Code:
C:\Users\Public\Games\World of Warcraft\WTF\Account\<ACCOUNT NAME>\<SERVER NAME>\<CHARACTER NAME>\SavedVariables\eXtremeUnitButtons.lua So, for example, if your account name is 'CarolinaWoW', and your server name is 'Shadowsong', and your character name is 'Awesomesauce', the XUB settings file would be located here... Code:
C:\Users\Public\Games\World of Warcraft\WTF\Account\CarolinaWoW\Shadowsong\Awesomesauce\SavedVariables\eXtremeUnitButtons.lua
Last edited by Cosmic Cleric : 09-09-10 at 04:54 PM.
|
|
![]() |
![]() |
Cosmic Cleric |
View Public Profile |
Send a private message to Cosmic Cleric |
Find More Posts by Cosmic Cleric |
Add Cosmic Cleric to Your Buddy List |
![]() |
|
|
Thank you for all the ideas.
My .lua file does update, but settings won't save. I made the profile, Code:
/xub profile pve Then it disappeared. I did a /xub profile pve, and all was reset, from UnitFrame selection to the single button I had made. But the lua file DID update on my character's folder as you indicated.
Last edited by Carolina : 09-10-10 at 08:05 AM.
|
![]() |
![]() |
Carolina |
View Public Profile |
Send a private message to Carolina |
Find More Posts by Carolina |
Add Carolina to Your Buddy List |
![]() |