(15Kb)

Updated: 10-04-13 09:45 PM

Add Favorite

Install Help

Pictures

File Info

Updated:	10-04-13 09:45 PM
Created:	12-12-08 09:46 AM
Downloads:	112,139
Favorites:	258
MD5:

Cooldowns

Version: 4.3.1

by: yarko [More]

A World of Warcraft add-on that displays numeric cooldown counters on buttons and other icons with cooldowns.

*** Having Problems? ***

Before posting a problem report, please make sure you are using the most recent release and try resetting all Cooldowns settings using the Defaults button in the Interface Configuration window. If your settings got messed up somehow during the recent updates, setting them to defaults may solve the problem. If that doesn't help, and you still don't see cooldown text, try adjusting the pixel width setting to a smaller number (default should be 27). If that doesn't help, post a problem report and make sure to include which other addons you run and any special configuration changes you make so I can try to replicate the problem. Also, if you run an older version because newer ones are not working for you, let me know. Otherwise, until scientists invent the teleporter and I can port to your computer, there isn't much else I can do for you.

PIXEL WIDTH

Users can set the minimum pixel width for cooldown text display. Cooldown counters will not appear on buttons or other cooldown icons that have a width smaller than the number chosen (except for the quest watch buttons which always show cooldown text). The default is 27 which is between the size of the standard player buff icon and the standard unit frame debuff icon. The standard action button width is 36 pixels. Scaling a cooldown icon using another addon until it is smaller than the selected minimum width will cause the cooldown text to stop displaying on that icon.

FILTERING

Too many cooldown texts all over the place? I made Cooldowns work with any visible cooldown in any addon (bigger than the default width of 27 pixels). To control where cooldown text appears in your UI, check out the Filtering tab in the Cooldowns configuration panel. You will see a list of all the UI frames (frames hold sets of cooldowns) that Cooldowns is aware of and you can uncheck the ones that you don’t want to see cooldown text on. Don’t want to see cooldown text on Bartender4 bar 6? Uncheck BT4Bar6. Don’t want to see text on WeakAuras icons? Uncheck WeakAurasFrame.

Deleting entries from the filter list will NOT block cooldowns on those frames. That will make Cooldowns forget about that frame, but the next time a cooldown is activated on that frame, it will be added to the list again enabling cooldown text on that frame. Delete filter entries when you will not be using those frames anymore such as when abandoning or changing addons. (Leaving filter entries in the list for addons no longer in use isn't really a problem. Doing so will only reduce efficiency very, very slightly.)

Configure colors, fonts, and other options through the Cooldowns interface options panel.

Please see the readme.txt file for a tutorial on how to configure fonts in Cooldowns.

* 4.3.1
- Updated toc to 50400

* 4.3
- Changed action bar button handling to use cooldown event

* 4.2.4
- Updated to 50300

* 4.2.3
- Fixed problem caused when rebooting computer while long cooldown is running

* 4.2.2
- Fixed problem changing minimum option value

* 4.2.1
- Added config text var YARKOCOOLDOWNS_CONFIG_MINIMUM2 for possible differences in languages
- Updated german translations

* 4.2
- User can now configure the minimum size for cooldown text placement
- Adjusted small text scaling
- Proper handling of BT4 as opposed to previous sloppy handling
- Efficiency improvements
- Better centering when cooldown is 2 lines
- Now checks higher up genealogy for filterable frame
- Now rounds width before checking size
- Hides when alpha is 0
- Now using Blizzards' color swatch template for borders and stuff
- Fixed config tab text coloring

* 4.1.1
- Fixed problem keeping cooldowns from rerecognizing parent frames

* 4.1 (release)
- Adjusted scaling so that single digits are the actual default font height
- Made action button handling more efficient by creating fewer ActionCooldowns table entries
- Fixed problem where reenabled cooldown texts would not reappear immediately
- Less space between lines in two-line cooldown texts
- Cooldown texts with M or H now show two lines when there are only two digits in the number
- Fixed scaling problem
- Made text fit available space better

* 4.1 (beta)
- Added parent frame filtering

* 4.0 (beta 5)
- Adjusted minimum cooldown size back to 27
- Now excepts only watch frame since that's all that's necessary
- Adjusted small scaling to fit button better
- Now names cooldown text frames if cooldown parent has a name for testing convenience
- Fixed scaling calculation
- Fixed size check calculation

* 4.0 (beta 4)
- Fixed scaling problem

* 4.0 (beta 3)
- Now properly handles scaled cooldowns
- Adjusted size threshold

* 4.0 (beta 2)
- Fixed bug related to charges in action button handler

* 4.0 (beta)
- Added minimum cooldown length config option
- Changed to hook to cooldown widget function for better compatibility with other addons
- Added support for TellMeWhen switch
- Fixed problem dealing with cooldowns without name
- Efficiency refactoring
- Updated to 50200

* 3.0.2
- Fixed problem with counter scaling when running with Bartender4
- Removed support for ButtonFacade since ButtonFacade is now Masque

* 3.0.1
- Fixed logic problem causing counters to not work properly when cooldown is restarted

* 3.0 release
- Added counters to the flyout frame

* 3.0 beta 2
- Added custom dropdown for font file selection to solve problem with taint using blizzard dropdown

* 3.0 beta
- Major rewrite to solve design problems that have been bugging me for some time
- Fixed bug that caused cooldowns on potions on actionbars to not show properly
- Added option to display the alternate color as solid instead of flashing
- Added pulldown for in-game fonts.

* 2.1
- Added options to disable cooldown number flashing and how many seconds to flash
- Removed upper limit for setting how many seconds to show seconds
- Fixed problems with cooldown text sizing

Comment Options

Page 3 of 5

08-17-09, 09:41 AM
Sec A Cyclonian Forum posts: 48 File comments: 177 Uploads: 0	Curiously, I'm still unable to use my font. The font is located within the Cooldowns folder. I'm wondering if that may be problematic somehow? The only other thing I guess is that perhaps the font won't show because I have it set to 8pt since it's a pixel font. I'll give it a try with other fonts and see what occurs. Thanks for the input.

12-08-09, 02:44 PM
zkyggen A Kobold Labourer Forum posts: 0 File comments: 2 Uploads: 0	yo any reason this doesnt work together with an addon like LoseControl?

01-14-10, 12:31 PM

yarko

A Murloc Raider

Forum posts: 4

File comments: 92

Uploads: 10

Re: yo

Originally posted by zkyggen
any reason this doesnt work together with an addon like LoseControl?

Probably because the LoseControl icons are not blizzard action buttons. The author must be using a custom cooldown engine.

01-25-10, 09:35 PM

q09q09

A Kobold Labourer

Forum posts: 0

File comments: 16

Uploads: 0

chinese locale

Localization.lua

Code:

YARKOCOOLDOWNS_TITLE = "Cooldowns";

YARKOCOOLDOWNS_CONFIG_MAINCOLOR = "Cooldown number color";
YARKOCOOLDOWNS_CONFIG_FLASHCOLOR = "Cooldown flash alternate color";
YARKOCOOLDOWNS_CONFIG_FONTLOCATION = "Font Location";
YARKOCOOLDOWNS_CONFIG_FONTFILE = "Font File Name";
YARKOCOOLDOWNS_CONFIG_FONTHEIGHT = "Font Height";
YARKOCOOLDOWNS_CONFIG_SHADOW = "Text Shadow";
YARKOCOOLDOWNS_CONFIG_OUTLINE = "Text Outline";
YARKOCOOLDOWNS_CONFIG_NONE = "None";
YARKOCOOLDOWNS_CONFIG_NORMAL = "Thin";
YARKOCOOLDOWNS_CONFIG_THICK = "Thick";
YARKOCOOLDOWNS_CONFIG_TENTHS = "Show tenths for minutes and hours";
YARKOCOOLDOWNS_CONFIG_BELOWTWO = "Show tenths below two seconds";
YARKOCOOLDOWNS_CONFIG_SECONDS = "Show seconds at";
YARKOCOOLDOWNS_CONFIG_SECONDS2 = "seconds";

YARKOCOOLDOWNS_CONFIG_FONTLOCATION_INFO = "Directory within the WoW file system where font is located. Use \"Fonts\" "
	.."for standard in-game fonts such as FRIZQT__.TTF. To indicate a file in an Addons subfolder, use "
	.."\"Interface\\Addons\\<add-on name>\\<subfolder>\".";
YARKOCOOLDOWNS_CONFIG_FONTFILE_INFO = "Name of the font file, such as \"FRIZQT__.TTF\" or \"ARIALN.TTF\""

local locale = GetLocale()
if locale == "zhCN" then
YARKOCOOLDOWNS_TITLE = "冷却";

YARKOCOOLDOWNS_CONFIG_MAINCOLOR = "冷却数字着色";
YARKOCOOLDOWNS_CONFIG_FLASHCOLOR = "冷却闪烁着色";
YARKOCOOLDOWNS_CONFIG_FONTLOCATION = "本地字体";
YARKOCOOLDOWNS_CONFIG_FONTFILE = "字体文件名";
YARKOCOOLDOWNS_CONFIG_FONTHEIGHT = "字体大小";
YARKOCOOLDOWNS_CONFIG_SHADOW = "文字阴影";
YARKOCOOLDOWNS_CONFIG_OUTLINE = "文字轮廓";
YARKOCOOLDOWNS_CONFIG_NONE = "无";
YARKOCOOLDOWNS_CONFIG_NORMAL = "细";
YARKOCOOLDOWNS_CONFIG_THICK = "粗";
YARKOCOOLDOWNS_CONFIG_TENTHS = "分钟/小时显示精确一位小数";
YARKOCOOLDOWNS_CONFIG_BELOWTWO = "低于2秒显示零头";
YARKOCOOLDOWNS_CONFIG_SECONDS = "显示多少秒之后";
YARKOCOOLDOWNS_CONFIG_SECONDS2 = "秒";

YARKOCOOLDOWNS_CONFIG_FONTLOCATION_INFO = "Directory within the WoW file system where font is located. Use \"Fonts\" "
	.."for standard in-game fonts such as FRIZQT__.TTF. To indicate a file in an Addons subfolder, use "
	.."\"Interface\\Addons\\<add-on name>\\<subfolder>\".";
YARKOCOOLDOWNS_CONFIG_FONTFILE_INFO = "字体文件名子，例如：\"FRIZQT__.TTF\" 或 \"ARIALN.TTF\""
elseif locale == "zhTW" then
YARKOCOOLDOWNS_TITLE = "冷卻";

YARKOCOOLDOWNS_CONFIG_MAINCOLOR = "冷卻數字著色";
YARKOCOOLDOWNS_CONFIG_FLASHCOLOR = "冷卻閃爍著色";
YARKOCOOLDOWNS_CONFIG_FONTLOCATION = "本地字體";
YARKOCOOLDOWNS_CONFIG_FONTFILE = "字體檔案名";
YARKOCOOLDOWNS_CONFIG_FONTHEIGHT = "字體大小";
YARKOCOOLDOWNS_CONFIG_SHADOW = "文字陰影";
YARKOCOOLDOWNS_CONFIG_OUTLINE = "文字輪廓";
YARKOCOOLDOWNS_CONFIG_NONE = "無";
YARKOCOOLDOWNS_CONFIG_NORMAL = "細";
YARKOCOOLDOWNS_CONFIG_THICK = "粗";
YARKOCOOLDOWNS_CONFIG_TENTHS = "分鐘/小時顯示精確一位元小數";
YARKOCOOLDOWNS_CONFIG_BELOWTWO = "低於2秒顯示零頭";
YARKOCOOLDOWNS_CONFIG_SECONDS = "顯示多少秒之後";
YARKOCOOLDOWNS_CONFIG_SECONDS2 = "秒";

YARKOCOOLDOWNS_CONFIG_FONTLOCATION_INFO = "Directory within the WoW file system where font is located. Use \"Fonts\" "
	.."for standard in-game fonts such as FRIZQT__.TTF. To indicate a file in an Addons subfolder, use "
	.."\"Interface\\Addons\\<add-on name>\\<subfolder>\".";
YARKOCOOLDOWNS_CONFIG_FONTFILE_INFO = "字體檔案名子，例如：\"FRIZQT__.TTF\" 或 \"ARIALN.TTF\""

end

__________________
CWOW Developer Group
http://bbs.cwowaddon.com
CWDG 中国魔兽世界插件开发团队
----------------------------
JIYUNUI

02-01-10, 03:16 PM
zohar101 A Cyclonian Forum posts: 43 File comments: 188 Uploads: 0	tweaks Need help on a couple of simple tweaks. How do I get the cooldown to stop flashing when it turns red. I just want it to stay red. Me tweaking with the lua usually results in broken addon Also, how to I set the counter at which it turns red to 5 instead of 3? Finally, how do I get it to count down to 0? I know as a 0 instead you have a little flash thing which is fine but I really like the 0 displayed as well. I used to change the lua file for omnicc for this as well. Was very simple change but I couldn't do it here without totally disabling the red color thing.

02-04-10, 04:58 PM

yarko

A Murloc Raider

Forum posts: 4

File comments: 92

Uploads: 10

Re: tweaks

Originally posted by zohar101
Need help on a couple of simple tweaks.

I'm sorry, but add-on is not configurable in those ways at this time.

02-04-10, 08:32 PM
Zidomo A Cliff Giant Forum posts: 76 File comments: 1046 Uploads: 0	This is a fantastic alternative to OmniCC. Except for one thing... Testing with OptionHouse (& CPU profiling enabled), OmniCC uses approximately 0.700 CPU/second when one cooldown on one Blizzard button is active. It more than doubles to approx. 1.420 CPU/second when two cooldowns are active. Cooldowns, on the other hand, uses only 1/2 or less of OmniCC's amount: approx. 0.368 CPU/second with one cooldown active, approx. 0.450 when two are active. But when idle (no cooldowns are active), Cooldowns uses approx. 0.130 CPU/second continually for some reason. OmniCC uses 0.0. So Cooldown's cumulative CPU benefits decrease over time. Would be nice to see Cooldowns also using 0 CPU when it is not active; then it would be perfect .

02-05-10, 05:42 PM

yarko

A Murloc Raider

Forum posts: 4

File comments: 92

Uploads: 10

Originally posted by Zidomo
This is a fantastic alternative to OmniCC. Except for one thing...

Yeah, I have heard.

I posted on curse that I am going to spend some time soon trying to solve some of the add-on's issues. Unfortunately, I don't think I am a good enough programmer to solve the performance problems, and I don't particularly want to copy code directly from OmniCC. We'll see...

Last edited by yarko : 02-07-10 at 07:03 AM.

02-19-10, 11:34 AM
JohnCover A Kobold Labourer Forum posts: 0 File comments: 19 Uploads: 0	Bug: CD text showing on 100% opaque bars. Forgive me if this has been brought up already, however there seems to be a slight cosmetic bug where cooldown text continues to show when action bars are configured to be at 100% opacity unless mouse-overred . OmniCC doesn't appear to have this issue. I'm currently using Bartender4 to apply this opacity on mouse-over function.

02-26-10, 04:00 AM

yarko

A Murloc Raider

Forum posts: 4

File comments: 92

Uploads: 10

Re: Bug: CD text showing on 100% opaque bars.

Originally posted by JohnCover
there seems to be a slight cosmetic bug where cooldown text continues to show when action bars are configured to be at 100% opacity unless mouse-overred .

Thank you for reporting this. I am aware of problems with compatibility with custom action bar mods.

10-16-10, 12:19 PM
shane3547 A Kobold Labourer Forum posts: 0 File comments: 55 Uploads: 0	Anyone know or confirm if this is working for 4.0.1? If not, will there be an update?

10-16-10, 02:53 PM
Bentobaku A Kobold Labourer Forum posts: 1 File comments: 19 Uploads: 0	So far mine is working with no problems... that i have noticed

12-13-10, 01:52 PM
unstoppixel An Aku'mai Servant Forum posts: 37 File comments: 131 Uploads: 2	For some reason lately the other mods like this have been dropping my framerate to unplayable. Not sure what it is... but this one doesn't do it. So I'm glad! Thanks for makin it!!! __________________

12-13-10, 07:16 PM
yarko A Murloc Raider Forum posts: 4 File comments: 92 Uploads: 10	Glad it works for you!

12-01-11, 04:11 PM
Squishy Tia A Murloc Raider Forum posts: 4 File comments: 98 Uploads: 0	Yarko, if you're still around, this addon is no longer working in 4.3. It isn't showing taint that I can see nor it BugGrabber/BugSack picking up anything from Cooldowns, but the action buttons no longer show the countdown text making them a lot harder to easily visualize when things get hairy. Just thought I'd shoot you a "what's up" so you know.

Page 3 of 5

Report this File

Category Jump:

Support AddOn Development!

You have just downloaded by the author . If you like this AddOn why not consider supporting the author? This author has set up a donation account. Donations ensure that authors can continue to develop useful tools for everyone.

[Disable these notices]